While some people might think flat roofs aren’t conducive to skylights, that’s not the case — in fact, flat roof skylights are perfect for stargazing and natural lighting. Flat skylights provide the best optical clarity, allowing gorgeous light to enter and illuminate a room. This is an excellent solution for flat-roofed buildings that otherwise have limited opportunities for natural lighting. Homes and businesses with low or flat-pitched roofs can install flat roof skylights, though a minimum pitch of 0.6-in-12 is often best to account for proper water drainage. A slight curve to the design might also be used to help with water dispersal. It’s possible to have flat skylights that can open for roof access, giving them another advantage for both residential and commercial structures. If you’re ready to experience the incredible visibility of flat roof skylights, contact us today to place an order!
Our skylights are built with a tough aluminum frame exterior providing extra strength to the unit. Built with the customer in mind our frame includes condensation gutters around the interior perimeter and weep holes at every corner allowing your skylight to breathe and whisk away condensation. We thoroughly believe quality control starts at the ground up, with that principle in mind we meticulously inspect each unit for blemishes before it gets our stamp of approval.
We can cater to any job. If you need more than the standard unit fall protection and windstorm approved skylights are a call away.
Built in the USA! .078” thick 6063 T-5 aluminum frames support each skylight. Our double dome units are produced with a minimum of 3/16ths clear acrylic on the outer dome and a 1/8th” lens for the inner.
Acrylic also commonly known as plexiglass has been the go-to material for skylight production since the beginning. Acrylic offers strengths up to 50 times stronger than glass at a fraction of the weight. If you need more impact resistance, we have rubberized acrylic, known as modified acrylic, and polycarbonate options available.
Factory assembled skylight with a .078″ thick 6063 T-5 aluminum curb frame, with a 4.5″ height and 3″ nailing flange, and a .062″ thick extruded aluminum retainer with stainless steel fasteners attaching the two. The self-flashing frame shall have an integral condensation gutter with weep holes (one each corner) to carry moisture to the outside. All corners are mitered and heliarc welded. Glazing shall be thermal formed domes of acrylic or polycarbonate (your choice of color).
Factory assembled skylight with a .078 thick 6063 T-5 aluminum curb frame and a .062 thick extruded aluminum retainer with stainless steel fasteners attaching
the two. Curb Frame shall have an integral condensation gutter with weep holes (one each corner) to carry moisture to the outside. All corners are mitered and
heliarc welded. Glazing shall be thermal formed domes of acrylic or polycarbonate (your choice of color).